Clamp-On Breaker Lockout

The use of high strength, good heat resistance, impact resistance, corrosion resistance of polypropylene PP material, high and low temperature -30 ~ 140℃ suitable for a variety of harsh working environment.

The BD-D11 is designed for circuit breakers with handle width ≤18mm to isolate and protect circuit breaker switches to protect employees from electrical accidents during equipment maintenance.

Knife teeth bite design, less force on the special-shaped screw, but more tightly combined, not easy to loose.

Use shaped screws to secure the lock to the switch handle, then fasten the cover to the shaped screw to lock it to prevent loosening.

Removable splints (included) further extend the scope of application.

The base can grip the bottom of the lock body very easily.

Long sliding splints ensure the circuit breaker is locked.

Product introduction

The clamp type breaker lock completes the locking of the handle of the breaker device by tightening the screw, realizes the safe management of locking and listing, and prevents mis operation.

Clip-on breaker lockers are versatile and easy to install using a proprietary finger wheel design - no screwdriver required!

It is suitable for circuit breakers with handle width ≤18mm to isolate and protect circuit breaker switches to protect employees from electrical accidents during equipment maintenance.

Product specification

Product application

Packing pictures

We can pack any packing way according to the customer's need.

Normally, we pack by nylon polybag/ unit box (whitw/kraft).

Customers' brand or logos or any special design can be made on the product and on the packaging.

FAQ

Q1: Can you put my logo on the product?

A: Yes, it is ok for us.

Q2: If I need the goods urgently, can you send by air freight?

A: Yes, we can send by air or by express.

Q3: What is your regular price term?

A: FOB Shanghai.