What To Do If The Door Lock Can't Be Opened
The door lock cannot be opened. If the door lock cannot be opened due to external force, it may be because the lock tongue inside is unhooked, or the shape of the lock tongue is distorted and the screw fixing the lock tongue falls off, which causes the door to jam. The best emergency treatment is to find the bolt and pull the screw that fell off from the crack of the door back to locate it. The easiest way is to ask a professional unlocking company to unlock it.
Every door has its own key, but what should we do when the door lock cannot be opened? In fact, when the door lock cannot be opened, we can use other methods to open the door. Next, the door lock supplier will introduce to you the solution to the door lock not opening.
If the toilet door lock in your house cannot be unlocked, we need a knife at this time, a sharp and thin knife. The sharper the tip of the knife, the better. First of all, you must hold the door from the outside of the toilet door to prevent that piece of energy. The shortened part is also called the lock shaft. The lock shaft should not be in contact with the lock groove to reduce friction. When the sharp knife penetrates into the gap of the lock groove, press the lock shaft in the free direction of the lock shaft. If you can’t open it once or twice, you have to try it a few more times, or you may open it.
If the anti-theft door closes hard after being securely bolted, a wooden tip made of a piece of hardwood can be used to squeeze in from the side seam of the door frame. The slanting tongue of the lock is separated from the lock box on the side of the door frame, and then a screwdriver or other auxiliary tool is used to pry the door outward or inward.
If the door is locked inside and the door gap is narrow, the above method will not work. You can choose a lock puller and pull out the lock first. After pulling out the lock, you can see the lock box through the hole of the device lock on the door. There is a hole in the lock box that can penetrate the flat square rolling pin of the lock. This hole is not big, and then use a homemade 7-shaped Steel wire (it can be made from motorcycle steel wire, flatten the end of the wire with a hammer, and then use a file to correct it). When doing this thing, you can find an old lock box to test and practice. If you practice a few more times, you can accurately find the position of the safe film. At this time, something can be inserted through the hole to pull the secure baffle inside the lock box, and the lock can be opened as long as the secure baffle is pulled.
Usually the door lock cannot be opened due to external force, perhaps due to the unhooking of the lock tongue inside, or the shape of the lock tongue is distorted, and the screw fixing the lock tongue has fallen off, which causes the door to jam and cannot get out. In this situation, the best emergency treatment is to find the bolt and pull the fallen screw back from the door gap to locate it. This method is limited to situations where the door lock cannot be opened due to foreign material forces.